Large concrete sections
Project-specific cuts where section size or geometry makes another approved method less suitable.
Wire Sawing Brisbane
Diamond wire sawing for large, thick or hard-to-reach concrete sections. Share the drawings, section size, access and removal plan so Cutcore can assess the proposed cut and prepare a project-specific quote.
Scope factors
What to confirm before work
A workable scope needs adequate wire routing, pulley and equipment positions, access for setup, water and slurry control, an approved cut sequence and a plan to support and remove the separated section.
Common applications
Where this method may fit the scope
Thick structural elements
Cuts considered after the structure, reinforcement, access and engineered sequence are understood.
Restricted blade access
Scopes where wire routing is practical but a conventional circular blade cannot reach the full cut.
Complex cut layouts
Defined cuts coordinated with support, lifting, removal and the surrounding work area.
Method and responsibility
Wire access is only one part of the plan
Wire sawing is not automatically dust-free, vibration-free or suitable for every large cut. Water, slurry, noise, wire routing, guarding, exclusion zones, reinforcement and adjacent operations must be considered for the actual setup. Achievable dimensions and production rates depend on equipment, material and conditions rather than a universal capacity claim.
The cut sequence and the stability of the remaining and separated sections should be approved by the responsible project parties. Heavy cut sections need an appropriate support, lifting and removal plan before separation. Relevant demolition, structural, high-risk construction and site-control requirements should be confirmed for the scope.
Services, silica and project controls
Concrete and similar materials can contain crystalline silica. The risk assessment, controls, documentation and work-area arrangements must suit the actual task and material.
Queensland silica-processing requirements · Before You Dig Australia · Queensland demolition guidance
Project pathway
Turn the request into a defined scope
- Share the details.Send drawings, dimensions, photos, material, access and required timing.
- Confirm responsibility.Establish approvals, known services, isolations, structure and site controls.
- Review the quote.Check method assumptions, inclusions, exclusions, section handling, timing and price.
- Prepare the work area.Complete the agreed access, markings, approvals and site-specific controls.
Planning questions
Clarify these points before work is booked
When might wire sawing be considered?
It may be considered for large, thick, irregular or difficult-to-access sections where wire routing and the wider work setup are practical.
Is wire sawing dust-free?
No cutting method should be described that way without reference to the actual controls and task. Silica-containing material, water, slurry and residual exposure all require project-specific management.
What access does the equipment need?
Provide photos and drawings showing the section, surrounding space, possible wire route, both sides where relevant, equipment positions and lifting access.
Who plans removal of the cut section?
The written scope should assign support, lifting, sectioning, removal and disposal responsibilities before work starts.
Discuss the scope
Send Cutcore the drawings, dimensions, access and timing
The team can review the information and identify what else is needed for a project-specific quote.