Road and pavement cuts
Planned cuts in accessible road, pavement or asphalt surfaces for defined civil and service scopes.
Road Sawing Brisbane
Road and slab sawing for planned cuts in concrete or asphalt surfaces, including pavements, driveways and service routes. Send the cut layout, depth, material and access details for a project-specific quote.
Scope factors
What to confirm before work
The suitable approach depends on the surface, required depth and length, reinforcement, access, edge conditions, nearby services, traffic or operational constraints and what happens to water, slurry and cut sections.
Common applications
Where road or slab sawing may suit the work
Slabs and floors
Straight cuts through horizontal slabs where the layout, depth, reinforcement and surrounding structure are known.
Driveways and paths
Defined access, removal, drainage or modification cuts in suitable concrete and asphalt areas.
Trenches and service access
Parallel or perimeter cuts for approved service routes, repair access and planned section removal.
Method selection
Match the saw and work zone to the site
A walk-behind road saw needs suitable horizontal access and operating space. Hand, ring, wall, wire or other methods may be more appropriate where the surface is vertical, access is restricted, corners must be controlled or the required cut cannot be safely approached with a road saw.
Cut depth is not the only planning factor. Reinforcement, slab condition, edge support, traffic management, nearby structures, services, noise, water and slurry handling can all affect the scope and sequence.
Services and silica controls
Current drawings, authorised markings and available asset-owner information should be reviewed before cutting. Scanning may support planning but does not guarantee that every embedded object or service has been identified.
Concrete and similar materials can contain crystalline silica. Review current Queensland silica-processing requirements and obtain relevant asset information through Before You Dig Australia.
Project pathway
Define the cut, controls and inclusions
- Send the layout.Share marked-up drawings or photos, cut lengths and depths, material, access and required date.
- Confirm the work zone.Identify service information, structural responsibility, traffic or occupancy constraints, water and slurry arrangements.
- Review the written scope.Check inclusions, exclusions, method assumptions, cutting sequence, timing and price.
- Prepare for attendance.Complete approvals, isolations, markings, access and site-specific controls before cutting starts.
Road sawing questions
Clarify the practical details first
What information should be marked on the plan?
Show the cut layout, lengths and depths, material, known reinforcement and the location of nearby services or structural features. Include access and traffic or occupancy constraints.
Can road sawing be used on asphalt and concrete?
The site lists both asphalt and concrete applications. The actual equipment and setup depend on material, depth, condition, access and the required result.
Is a road saw suitable for every concrete cut?
No. Road saws suit accessible horizontal surfaces. Hand, ring, wall, wire or other cutting methods may be more appropriate for restricted access, vertical work, controlled corners or a different structural condition.
How are hidden services managed?
Use current drawings, service-owner information, authorised markings and site knowledge. Scanning may provide additional information, but it should not be treated as a guarantee that every service or embedded object has been found.
Are slurry and cut-section removal included?
Confirm water, slurry, cut-section handling, loading and disposal in the written quote. Inclusions vary with access, material, method, site rules and project scope.
Discuss the cut
Send Cutcore the layout, material, depth, access and timing
The team can review the details and confirm what further information is needed for a project-specific scope.